Quote:
Originally Posted by ghemmen
I just changed the oil the day before the problem started. Amsoil 0w-40 full synthetic. Also changed to Engine Ice from EG. Had a dirty air filter. Changed to K&N. The Idiot light sender is bad causing the light to blink intermittently. Also burped the system and it had some air at the bleeder. My next step is to install a real Temp gauge so I can see what is really going on. May have to modify the sender port to accept the gauge sensor.
|
not if you get an guage from iequus.com tell them you need the little sender for a rhino. goes right in stock location, then ground the orig wire to it so the light stays off.
also you can add a tcp (totally cool Products)fan shroud, this helped mine it is about $50 bucks.
for the other poster, there is no thermostat.