Juanos Rotax Build!!!

controled force · 02-23-2009, 08:02 PM

After sucking a pound of sand threw the motor,it was rebuild the stock 700 or go for the Rotax,that was a no brainer.

We pulled out the motor this weekend,oh thanks for showing up so LATE

Trooper522 · 02-23-2009, 08:13 PM

So are you instructing Juanos on how to do this ?....Looks like fun

controled force · 02-23-2009, 08:18 PM

Quote:

Originally Posted by Trooper522

So are you instructing Juanos on how to do this ?....Looks like fun

Hey,I got to make him roll up his sleeves and do some WORK

Hapa · 02-23-2009, 08:19 PM

OW shit!!!!!!!!!!!!!!!!!!!!

BrownSkidMarks with a big set of HP balls in his ride

hope he dosent end up looking like Turbo

Juanos · 02-23-2009, 08:19 PM

Quote:

Originally Posted by controled force

After sucking a pound of sand threw the motor,it was rebuild the stock 700 or go for the Rotax,that was a no brainer.

We pulled out the motor this weekend,oh thanks for showing up so LATE

Sorry I was late, I thought it would take 1 hour to remove the motor and 30 minutes for the Outlander Strip down. I've seen 2 mexicans strip a car down to the frame,in 15 minutes,in an alley, using a cresent wrench.

Thanks for taking the time to help me out with this big headache. I couldn't do it with out ya!!

Juanos · 02-23-2009, 08:20 PM

Quote:

Originally Posted by Hapa

OW shit!!!!!!!!!!!!!!!!!!!!

BrownSkidMarks with a big set of HP balls in his ride

hope he dosent end up looking like Turbo

I'm removing the HCR spindles.....so I won't be looking like turbo

controled force · 02-23-2009, 08:22 PM

Quote:

Originally Posted by Juanos

Sorry I was late, I thought it would take 1 hour to remove the motor and 30 minutes for the Outlander Strip down. I've seen 2 mexicans strip a car down to the frame,in 15 minutes,in an alley, using a cresent wrench.

Thanks for taking the time to help me out with this big headache. I couldn't do it with out ya!!

Maybe we should have taken it out to South Sac.It would've been striped it no time!!!!!!!!!

BiggJim · 02-23-2009, 08:26 PM

You fuckers are slow

I could have had the whole thing stripped in 30 minutes

...Lets just say I have some experience

controled force · 02-23-2009, 08:27 PM

So why the hell didn't you show up

Juanos · 02-23-2009, 08:30 PM

if only CF had a bit more tools

....we both had to pass the 14mm and 10mm back and forth.

For S.Sac....but I didn't bring my bullet proof vest

We need some of the resuse some of the parts....they'll run off with the whole rhino...only thang they'd leave with would be sand and oil.