|Topic Review (Newest First)|
|04-07-2010 11:03 AM|
|04-07-2010 10:08 AM|
|04-07-2010 08:04 AM|
|Bryan M||glad we were able to help...welcome to RT!|
|04-06-2010 11:14 PM|
|04-06-2010 09:30 PM|
Thank you everyone for all the input! It was the clutch, mud and crap in it! All we had to do was take everything apart and clean it. It was completely gunked up and the lube was all dry and crumbling. It was a zero cost fix and runs perfect now!! Thank you!
|04-06-2010 03:06 PM|
One of 4 things...
1. Bad CDI
2. Worn Belt
3. Mud in Sheave
4. Green wire with white strip came loose behind Digital Display. The reverse light may be on...
|04-06-2010 10:31 AM|
|TURBO||MEASURE the V belt (the belt that runs the clutch) 1.31in or 33.2mm is new..... 1.18in or 29.9mm is no good and out of specification.It sounds like its time for a new belt .. and the deal max has for that cdi is a good one and something you should get but reving out and not going really sounds like the belt.....hope this helps|
|04-06-2010 08:06 AM|
if you look under the hood, right next to the battery, there is a little box with three plugs going into it and one screw holding it on, it is called a cdi, or the computer for the rhino, it contains the rev limiter, you need to replace the one you have with a dynatek performance cdi.
I just happen to have a new one left over from the utvcrap trailer.
brand new they are over $200
This is a brand new one and you can have it for $175
|04-05-2010 08:29 PM|
|05 rhino||your right about 40's.....mine is an 05 and it cuts off at 42mph.and its still stock|
|04-05-2010 08:02 PM|
|firegal003||I'm pretty sure the stock Rhinos are governed at 40. I'll have him check the belt. Thx.|
|This thread has more than 10 replies. Click here to review the whole thread.|