Lawrence 7200 question - Yamaha Rhino Forums - Yamaha UTV Forum
Yamaha Rhino Electrical Discussions Yamaha Rhino electrical discussions.
Lighting, audio, GPS, communications, etc.
Maintenance, cleaning, etc.
Off-topic posts should be put in the Off-Topic Forum.

LinkBack Thread Tools Display Modes
post #1 of 4 (permalink) Old 11-22-2008, 05:00 PM Thread Starter
Wide F'n Open
trestles126's Avatar
Join Date: Aug 2008
Posts: 214
Lawrence 7200 question

Quick question, the power cable has the red the black for the main power on the back of the unit. Then it has 2 more loomes, with colored wires coming off in all the instructions it says something about nmea modules and what not. Dont all you need to do is have the power cables ran with a 3amp fuse in line for the display, and the network cable ran to the Satalite reciever? all the other cables are for marine applications correct?
trestles126 is offline  
Sponsored Links
post #2 of 4 (permalink) Old 11-23-2008, 12:36 AM
Wide F'n Open
SXSCustms's Avatar
Join Date: Jun 2008
Location: SF Valley, CA
Posts: 399
You are correct... Just hook up the Positive and Black with a Fuse and a switch and you are good to go. The rest of the cables are for DATA etc... Network cable ties into the Antenna.

Last edited by SXSCustms; 11-23-2008 at 12:50 AM.
SXSCustms is offline  
post #3 of 4 (permalink) Old 11-24-2008, 08:49 AM Thread Starter
Wide F'n Open
trestles126's Avatar
Join Date: Aug 2008
Posts: 214
ok got it wired, since the ciggwrete lighter wasn't being used we ran the gps off of those wires as well as the fuel gauge.

Problem- the gps booted up just fine, then started flickering randomly( not on and off but the brightness) anyone ever have this problem?

Also the maroon network cable going from the lil white satalite dish to the unit doesn't plug directly into the back of the display unit both ends are male, so we ram it through the stupid lil 4 way splitter and it's saying the dish isn't connected any advice do they make a cable that goes directly from the dish to the display?
trestles126 is offline  
post #4 of 4 (permalink) Old 11-24-2008, 10:37 AM
Wide F'n Open
SXSCustms's Avatar
Join Date: Jun 2008
Location: SF Valley, CA
Posts: 399
Please check you battery voltage and did you cut off the cig adapter or just taped those wires?

The Antena dos need the extension cable as it has the correct plugs... If you have to jam something in its not a good sign.

Feel free to call me if you need more help.
SXSCustms is offline  
Sponsored Links


Quick Reply

Register Now

In order to be able to post messages on the Yamaha Rhino Forums - Yamaha UTV Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:


Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Similar Threads
Thread Thread Starter Forum Replies Last Post
another question on mid travel crackerjack Yamaha Rhino Suspension Discussions 10 11-26-2008 11:53 AM
gps question?? waytay Yamaha Rhino General Discussions 15 10-22-2008 09:17 AM
Sheeve Question BiggJim Yamaha Rhino Performance Discussions 11 09-29-2008 04:12 PM
rim question? ut rhino Yamaha Rhino General Discussions 2 09-07-2008 11:44 AM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58