no power to coil
Hi guys hope you can help me. Drove my 05 rhino 660 and it ran great. Parked it in my garage and the next night went to get it out and no spark. No power going to coil. Tested the stator and pickup coil and seemd to test OK so I got a new CDI and installed that. Still no juice. I have tested all fuses and I am getting power to the CDI. I retested the stator and the pickup coil is in specs. The manual calls for a ohm meter to be set on 1 for the stator test but mine has a 2. Anyhow my ohm reading for the stator shows .000. Do I have a bad stator or do I need to find an ohm meter that has a 1 for the ohms? My manual says that the ohms should be between 0.063-0.077. Thanks in advance for any help. I'm pulling my hair out on this one.