Chad Mittag joins Team SDR - Yamaha Rhino Forums - Yamaha UTV Forum
Yamaha Rhino General Discussions General discussions pertaining to the Yamaha Rhino.

 
LinkBack Thread Tools Display Modes
post #1 of 7 (permalink) Old 12-10-2008, 08:02 PM Thread Starter
1/4 Throttle
 
Bajabuggin's Avatar
 
Join Date: Jun 2008
Posts: 28
Chad Mittag joins Team SDR

We are proud to announce Chad Mittag as the newest member of the SDR family.

Many of you know Chad as a very talented fabricator and driver and we couldnt be happier to have him under the SDR banner.

For those that dont, Chad is truly one of the original UTV racing pioneers. He comes to us with years of fabrication/ racing experience with Mafia Ind. and is as excited as we are to raise the bar even higher both in the shop and on the track.

He will be heading up our fabrication/ manufacturing department as well as doing all of the design and engineering for our LT6 suspension program.

We are 100% finished with our Teryx LT kit and are moving on to the RZR kit as we speak.

Along with his duties in the shop Chad will be heading up our new Racing division where we will be offering everything from full race prep to complete turnkey race cars both for short course and desert racing series.

Chad will also be joining us in the final development of our new turnkey car due out early next year.

We are working hard on developing some new programs and plan to have a few more big announcements coming soon so keep an eye on our site SDR Motorsports for updates!

Thanks!

We are also moving into our new shop in Corona over the next two weeks. We will be closed Dec 19-20 to complete the move and will remain open in our current shop in Perris until then.

The new shop is located at 11614 Sterling Ave. #103 Riverside, CA. and will be open starting Dec 22. so feel free to stop by and say hello and check out some of the project we have going on in the shop!
Bajabuggin is offline  
Sponsored Links
Advertisement
 
post #2 of 7 (permalink) Old 12-10-2008, 08:17 PM
Super Moderator
 
mikef's Avatar
 
Join Date: Jun 2008
Location: Inland Empire (Beumont, Ca.)
Posts: 1,068
Thats great Tim.... Glad to hear you guys are doing well.... Chad is a great addition. Next time I am there I will give him a few pointers on Rhino Races... LOL.

2006 Rhino 660
BRP Stage 2 CDI
UTVCrap Sheave
4 Seat Cage w/42" Rear PRP Seat
ITP T-7C Wheels (5+2 front offset & 2+5 Rear)
Big Horn Tires (25x8x12 & 25x10x12)
LSR MTS +3 Mid Travel Kit
Bilstein Shocks w/ Eibach Springs 250lb front & 400lb rear
http://i105.photobucket.com/albums/m...BRP_Avatar.jpg http://i105.photobucket.com/albums/m...avatar/byc.jpg http://i105.photobucket.com/albums/m...r/uutv1211.jpg
mikef is offline  
post #3 of 7 (permalink) Old 12-10-2008, 09:09 PM
RhinoTalk.net Site Sponsor
 
max powers's Avatar
 
Join Date: Jun 2008
Posts: 2,988
Quote:
Originally Posted by Bajabuggin View Post
We are proud to announce Chad Mittag as the newest member of the SDR family.

Many of you know Chad as a very talented fabricator and driver and we couldnt be happier to have him under the SDR banner.

For those that dont, Chad is truly one of the original UTV racing pioneers. He comes to us with years of fabrication/ racing experience with Mafia Ind. and is as excited as we are to raise the bar even higher both in the shop and on the track.

He will be heading up our fabrication/ manufacturing department as well as doing all of the design and engineering for our LT6 suspension program.

We are 100% finished with our Teryx LT kit and are moving on to the RZR kit as we speak.

Along with his duties in the shop Chad will be heading up our new Racing division where we will be offering everything from full race prep to complete turnkey race cars both for short course and desert racing series.

Chad will also be joining us in the final development of our new turnkey car due out early next year.

We are working hard on developing some new programs and plan to have a few more big announcements coming soon so keep an eye on our site SDR Motorsports for updates!

Thanks!

We are also moving into our new shop in Corona over the next two weeks. We will be closed Dec 19-20 to complete the move and will remain open in our current shop in Perris until then.

The new shop is located at 11614 Sterling Ave. #103 Riverside, CA. and will be open starting Dec 22. so feel free to stop by and say hello and check out some of the project we have going on in the shop!

Why did he leave MAFIA IND.???

VictoryGardenshydro.com
WeedConnect.net,get connected
max powers is offline  
post #4 of 7 (permalink) Old 12-10-2008, 09:20 PM Thread Starter
1/4 Throttle
 
Bajabuggin's Avatar
 
Join Date: Jun 2008
Posts: 28
Im not sure of exactly when he left but it was about a month or so ago.
Bajabuggin is offline  
post #5 of 7 (permalink) Old 12-11-2008, 12:53 PM
Founding Ninja
 
tat2max's Avatar
 
Join Date: Jun 2008
Location: az
Posts: 261
congrats

Nice work Tim, hows the new shop? I left you a vm today, call me back....
Taylor
tat2max is offline  
post #6 of 7 (permalink) Old 12-11-2008, 04:54 PM
Wide F'n Open
 
BrianAshby1's Avatar
 
Join Date: Dec 2008
Location: Menifee CA
Posts: 161
Hey tell Chad the old 106 rhino needs a LT kit... he will know what I mean..

BrianAshby1 is offline  
post #7 of 7 (permalink) Old 12-11-2008, 04:57 PM
Founding Ninja
 
07fj's Avatar
 
Join Date: Jun 2008
Location: ramona, ca
Posts: 3,156
Congrats, seems that two good peeps just got together.

Good luck with your new shop.


Rog



Benchmark Performance 686, 67.6 RWHP
http://www.unleashedutv.com/ 602-246-4011
Rigid Industries 480.655.0100
07fj is offline  
Sponsored Links
Advertisement
 
Reply

Bookmarks

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Yamaha Rhino Forums - Yamaha UTV Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome
 


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57