Yamaha Rhino Forums - RhinoTalk banner
1 - 20 of 27 Posts

·
Registered
Joined
·
792 Posts
Discussion Starter · #1 · (Edited)
I can post pics of all this so just ask what you want to see.

Rear drive shaft & dust boot and clips $40.00

Front drive shaft $40.00

Stock fuel tank with billet pick up and fuel sending unit already installed W/ autometer fuel gauge and complete wiring harness $130.00

Headlight lens assembly W/adjust screws $10.00 both sides

Oil cooler (no lines I threw them away, to hard to ship) $30.00

Radiator with custom dual fan shroud (no fans) $80.00

2 stock Rear shocks $40.00 both

Left & Right floor boards $50.00 both sides

Rear sway bar with rubber bushings & end hardware to mount to a-arms $ 30.00

Looney Tuned exhaust Duals $450.00

Rear Diff $400.00

Rear gorilla cv's outter both sides and inner both sides but have been machined to bolt together so you'll never have a axle pop out again $ 250.00 all 4

NEW Stock front inner CV boot (still in Yamaha box from dealer) $30.00

Gorilla CV boots brand new 2 front inner and 1 rear inner $50.00 all

both radiator hoses ( one hose is cut with sensor spliced into it for temp gauge)and hard pipe $25.00

Complete wiring harness with battery box and all fuses $175.00

Rhino Craft aftermarket CDI box $150.00

Autometer temp gauge and complete wiring harness and temp senser $130.00

Throttle cable $7.00

stock front axles with parts of the cv's $ 50.00 both sides

complete pedal assembly with master cylinder and mounting brakets (gas and brake $120.00

single rear brake set up with caliper and disc $120.00

Stock Tailgate with safety straps to hold it up. $40.00

EVERYTHING STILL NEEDS TO HAVE SHIPPING ADDED TO IT. let me know what you want and I can package it up and weigh it so I don't over charge you for shipping. I will need your shipping address.
 

·
Registered
Joined
·
792 Posts
Discussion Starter · #2 ·
I can post pics of all this so just ask what you want to see.

Rear drive shaft & dust boot and clips $40.00

Front drive shaft $40.00

Stock fuel tank with billet pick up and fuel sending unit already installed W/ autometer fuel gauge and complete wiring harness $130.00

Headlight lens assembly W/adjust screws $10.00 both sides

Oil cooler (no lines I threw them away, to hard to ship) $30.00

Radiator with custom dual fan shroud (no fans) $80.00

2 stock Rear shocks $40.00 both

Left & Right floor boards $50.00 both sides

Rear sway bar with rubber bushings & end hardware to mount to a-arms $ 30.00

Looney Tuned exhaust Duals $450.00

Rear Diff $400.00

Rear gorilla cv's inner both sides but have been machined to bolt together so you'll never have a axle pop out again $ 200.00

NEW Stock front inner CV boot (still in Yamaha box from dealer) $30.00

Gorilla CV boots brand new 2 front inner and 1 rear inner $50.00 all

both radiator hoses ( one hose is cut with sensor spliced into it for temp gauge)and hard pipe $25.00

Complete wiring harness with battery box and all fuses $175.00

Rhino Craft aftermarket CDI box $150.00

Autometer temp gauge and complete wiring harness and temp senser $130.00

Throttle cable $7.00

stock front axles with parts of the cv's $ 50.00 both sides

complete pedal assembly with master cylinder and mounting brakets (gas and brake $120.00

single rear brake set up with caliper and disc $120.00

Stock Tailgate with safety straps to hold it up. $40.00

EVERYTHING STILL NEEDS TO HAVE SHIPPING ADDED TO IT. let me know what you want and I can package it up and weigh it so I don't over charge you for shipping. I will need your shipping address.
Update
I have SOLD
CDI
Wiring Harness
Rear Diff
Looney Tuned Exhaust


Sales Pending on
Fuel tank and gauge
Water Temp gauge
Inner CV's
 

·
Registered
Joined
·
792 Posts
Discussion Starter · #7 ·
UPDATE ON ITEMS STILL FOR SALE

Fuel tanks with autometer fuel gauge and sending unit

oil cooler

radiator with dual fans and fan shroud

Stock front axles

1 gorilla axle for 6.5" LT kit (good for a spare)

2 Gorilla front CV boots Brand New

Radiator hoses and aluminum pipe

Rear caliper for single brake set up

2 stock rear shocks

rear sway bar with mounts

1 Brand new front inner CV boot Kit from Yamaha

Stock fuel tank plastic T- pick up

Front stock brake lines
 

·
Registered
Joined
·
792 Posts
Discussion Starter · #8 ·
all I have left is :

4 seat Rhino Craft cage with roof and doors.....Make me a offer:(

OEM front inner CV boot kit

Stock plastic fuel pick up T

2 stock rear shocks perfect cond.

Steering wheel adapter for a aftermarket wheel onto stock steering shaft
 

·
Registered
Joined
·
431 Posts
I wish mine would NEVER pop out :mad:

Do you know how they had to be machined? Couldn't you just drill a hole in them where the little hole is that dumps all the grease from your CV into the diff?

Thanks anyways...
 

·
Registered
Joined
·
792 Posts
Discussion Starter · #13 ·
I wish mine would NEVER pop out :mad:

Do you know how they had to be machined? Couldn't you just drill a hole in them where the little hole is that dumps all the grease from your CV into the diff?

Thanks anyways...
There's a lot more to it then just that.
He had to do it on a CNC machine and then drill the ends of the pin out and tap it for a special bold that will still clear all the moving parts once it's assembled

I would PM Todd at 151fab and ask him. Maybe he'll machine another set for you.
I know it took him all day to figure it out and do the work.





 

·
Registered
Joined
·
792 Posts
Discussion Starter · #15 ·
Do you have a front Diff. avaliable?
Are the Gorilla CV's Gone?
Thanks, Pauly
Sorry, They were sold.
Right now all I have are 2 rear nonresi stock shocks
1 stock rear brake caliper
2 rear almost brand new Paddle tires with rims. Used 3 trips.
and the 4 seat cage. Minus the side doors
 
1 - 20 of 27 Posts
Top