How much are you guys pullin out of your stock charging system? How many HID's are too much for stock setup?
I'm sure it can be done....however you will be drawing more power than the charging system has to offer.So no running the 4 up top with the HID swap in the stock housings? I swear I have seen someone do it with no problems...
Alright then smarty pants....J/K.....how much of that power output does the rhino consume while running with no lights on????????660 specs- around 322 watts
Nominal output 14 V 23 A at 5,000 r/min
700 specs- around 469 watts
Standard output 14.0 V 33.5 A at 5,000 r/min
Info from the Service Manual specs.
Read my signature.
I figured you would chime in on that.......I have been wondering what the awnser to that question was. So if that stands true I should be able to run my 5 lights. I have no other draws besides the tail lights.About a 100watts
Is it an automotive type kit??? With the pully that goes on the fan side....If so I wouldnt touch it. Thats just one more thing pulling down what little HP you motor is making.rick stater alt kit and run 10 hids and add anly 1.5 pounds your done and can add any thing you want :yahoo: like a SSV sound sys.